FO-1 ONE CHANNEL, UNIDIRECTION, VIDEO TRANSMITTER AND RECEIVER
Analog Transmission

Feature

  • Base band or FM transmission.
  • AGC function.
  • Typically, the maximum transmission distance 5 Km for multi mode optical fiber products and 55 Km for single mode fiber products. (Transmission distance is
    limited to fiber loss, connector loss etc.)
  • Low noise.
  • MTBF > 100000 hr.

 

Description

The FO-1 series video transmitter/receiver provides transmission of one channel video signal utilizing FM modulation or baseband on one multi mode optical fiber. Plup and Play design ensures ease of installation without electrical or optical adjustments. The receiver incorporates a power and signal LED indicators for monitoring system operation. These modules are available in stand-alone or rack mount versions. The FO-1 video transmitter/receiver on single mode fiber, are also available.

 


Specification
Fiber-optics
Fiber type Multi-mode (62.5/125 m) Single-mode
Wavelenght 1310nm 1310nm
Light source LED: more than-15dBm LD:0 ~ -3dBm
Receiver sensitivity* -19dBm ~ -21dBm -19dBm ~ -22dBm
Power budget* 4 ~ 6dB 16 ~ 19dB
Fiber connector ST FC/PC
* Sensitivity is defined as a minimum optical power at the receiver input giving acceptable image quality.
* Subtract 4 dB from power budget when use 50/125 m fiber.
 
Video
Video input or output 1 Vp-p, 75ohms; BNC connector
Bandwidth 8MHz
S / N 55dB
Differential gain, phase ?5%,5
 
Electrical and mechanical
Power supply* DC 12V; 60mA(TX-base band), 120mA(RX-base band)
150mA (TX and RX,FM)
*referred to order information
Dimension (W x H x L) mm (1)stand-alone
17.5 X 17.5 X 87 (TX-stand alone)
98 X 64 X 26 (TX and RX, FM; RX-stand alone)
(2)rack-mount 165 X 33.5 X 220
 
Environment
Operation temperature - 10C ~ +65C
Storage temperature - 20C ~ +80C
 
Transmission type
Base-band or FM

 

< ONCEKI
URUNLER
ANA SAYFA
HAKKIMIZDA
SONRAKI >